Jacro 240

TECHNICAL SPECIFICATIONS:
A. Unit Power Supply :

• Engine Diesel Kubota 4 Cylinder V2203-E2B-EU-X3 Made in Original Japan.
• Power 40 Hp/ 3000 Rpm
• Hydraulic Power by Marzocchi ALP3AD60 + ALPPD2A16 Double ( for Rotary, and for up/down)
  – Pressure 3000 Psi/210 bar
  – Hydraulic Tank : 80 litre
  – Diesel Fuel tank : 30 litre

B. Unit Control Device :

• Hand Control Valve 3Bank 1/2” Monoblock Branded Integral Italy IHV 20-3D/d5 ( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ).
• Hand Control Valve 3Bank 3/8” Mono block Branded Integral Italy IHV 18-3D/d5 ( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ).
• Relief Valve : For Adjustment pressure up/down Integral RV2-1/2” –F,
• Max Pressure 3000 Psi.
• Regulator Valve : For adjustment flow up/down Integral FRV2-1/2”
• Max flow 150 liter / minute,
• Brake Valve : For adjustment brake winch and wire line,
• Branded Integral Italy CBV2 ½” 0-3000 Psi,
• Pressure Gauge : By. Skon USA 0-250 Psi

C. Unit Power Device :

1. Rotary Head Motor Jacro 240 5(RH ½”) 4000 Series 109-1116 -006 By. Eaton USA

• Speed Power : 0-1200 Rpm,
• Power Pressure : 0-3000 Psi,
• Speed Rotary : 700-1500 Rpm

1. Up/Down Cylinder Hydraulic DFM 240 5CH Dia 63 x 73 x 40 x Stroke 1800mm

• Torsi Capacity : 915MM (66641 lb/in),
• Speed Power : 1000MM/10 Second,
• In / Out Port : 1/2” SAI O-ring

1. Wire Line Hydraulic Motor Jacro 240 5(RH 2/2) S Series 103-1032-010 By. Eaton USA

• Torsi Capacity : 452NMC (3961 lb/in),
• Speed Power : 0-250 Rpm,
• In/Out port : ½” SAI O-ring –
  1. Winch Hydraulic Motor Jacro 240 5(RH 2/2) 2000 Series 104-1228-006 By. Eaton USA
• Torsi Capacity : 452NMC (3961 lb/in).
• Speed Power : 0-250 Rpm,
• In/Out port : ½” SAI O-ring

1. Cylinder Sleding Gearbox Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm

• Torsi Capacity : 542 NMC (5675 lb/in),
• Speed Power : 0-500Meter/ 1.5 Second,
• In/Out port : 5/8” SAI O-ring

1. Hydraulic Clamp Chuck Assy Jacro 240 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm

• Torsi Capacity : 300 NMC (5675 lb/in),
• Speed Power : 0-1 Meter/ 1.5 Second,
• In/Out port : ½” SAI O-ring
• Oil Cooler : 250 Ltr
• Water Injection Pump : Yanmar TF 85 + Sanchin 120
• Drill Pipe : 50 pipe (seemles) NQ3” / HQ3” @ 3 meter
• Drill Bite : Wingbite / PCD
• Water hose : hose polypipe
• Core barel : Assy NQ / HQ

OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
• NQ 250 Meters
• HQ 125 Meters
• PQ 60 Meters