Jacro 300

TECHNICAL SPECIFICATIONS:

1. Unit Power Supply :

• Engine Diesel Kubota 4 Cylinder V2203-E2B-EU-X3 Original By Japan.
• Power 40 Hp/ 3000 Rpm
• Hydraulic Power by Gear Pump ALP3A-D-40-FG+ ALPP2-D-16-FG Marzocchi By Italy ( For Rotary and Hydraulic Pull Up Down )
  – Pressure 3000 Psi/210 bar
  – Oil Tank Cap : 135 litre
  – Fuel tank Cap : 37 litre

1. Unit Control Device :

• Directional Control Valves 3Bank 3/4” Sectional IHV-03-P100 A111A8GKZI integral By Italy ( For Hydraulic Rotation, Hydraulic Winch and hydraulic lift Mash Assy ).
• Directional Control Valve 5Bank ½” Monoblock IHV-05-P80-A1111 A8GKZI Integral By Italy ( For Hyd Pull Up Down , Sliding Gearbox, Clamp Chuck Hyd. Jack Mash & Hyd. Wireline).
  • Relief Valve : For Adjustment pressure up/down RV2-1/2” Integral By Italy
• Regulator Valve : For adjustment flow up down WFC-800 ½” Wolverine
• Brake Valve : For adjustment brake/rem winch and wire line CBV2-1/2” Integral.
• Pressure Gauge : Dia 2 ½” 0 – 250 Bar Connection ¼” By. Skon.

1. Unit Power Device :
2. Rotary Head Motor DFM 300+S Type 4000 Series 109-1116-006 By Eaton USA.

• Speed Power : 0-600 Rpm.
• Power Pressure : 0-3000 Psi,
• In/Out Port : 5/8” SAI O-Ring

1. Hydraulic Pull Up Down DFM300+S Ø Bore 85 Rod. 50 Stroke 1650 By DFM Engineering

• Torsi Capacity : 521Nm,
• Speed Power : 1000MM,
• In / Out Port : 1/2” SAI O-ring

1. Hydraulic Sliding DFM300+S Ø 40 Rod. 25 Stroke 250 By. DFM Engineering Manufacture

• Torsi Capacity : 542 Nm,
• Speed Power : 0-500 Rpm,
• In/Out port : 3/8” NPT

1. Hydraulic Clamp Chuck Assy DFM300+S Ø Bore 40 Rod. 25 Stroke 70 By DFM Enginerring

• Torsi Capacity : 524 Nm
• Speed Power : 0-300 Rpm,
• In/Out port : 3/8” NPT 5. Hydraulic Motor Winch DFM300+S Type 4000 Series 109-1119-006 By Eaton USA
• Torsi Capacity : 926 Nm,
• Speed Power : 0-100 Rpm,
• In/Out port : 3/4” NPT

1. Hydraulic Lift Mash DFM300+S Ø Bore 63 Rod. 40 Stroke 600 By DFM Engineering

• Torsi Capacity : 477 Nm,
• Speed Power : 0-120 Rpm
• In/Out port : 1/2” NPT

1. Hydraulic Motor Wireline DFM300+S Type 2000 Series 104-1228-006 By Eaton USA.

• Torsi Capacity : 755 Nm.
• Speed Power : 0–191 Rpm.
• In / Out Port : 1/2” NPT

1. Hydraulic Jack Mash DFM300+S Ø Bore 63 Rod. 40 Stroke 1500 By DFM Engineering

• Torsi Capacity : 117 Nm.
• Speed Power : 0–500 Sec.
• In / Out Port : 1/2” NPT ACCESSORIES DEVICE :
• Water Swivel DFM300+ Singel Line Assy
• Gear Box DFM300+ Singel Line Assy
• Suction Filter MF-10 (1 ¼”) & MF-12 (1-1/2”)
• Return Line Filter INT-100 (1 1/4”)
• Sight Level and Temperature Gauges LS-5”
• Oil Cooler OR-250 Liftre – Filter Breather Filter AB-1163
• Pilot Check Valves PCV1-3/8”
• Accu Incoe NS70 Complete
• Skid and Mash Plate Steel
• Hydraulic Hose
• Nepple and Fitting Etc.

DRILLING CAPACITY
• Drill Rod HQ3 Size : 150 Metre