Jacro 400

TECHNICAL SPECIFICATIONS:

1. Unit Power Supply :

• Engine Diesel Kubota 4 Cylinder V3300-E2B-EU-Z4 Made in Original Japan.
• Power 68 Hp/ 2600 Rpm
• Hydraulic Power by Piston Pump ADU62+70122RAH Double ETN Vickers ( For Rotary And For Up/Down )
• Pressure 3000 Psi/210 bar
• Hydraulic Tank : 120 litre
• Diesel Fuel tank : 30 litre

1. Unit Control Device :

• Hand Control Valve 3Bank 3/4” DTSC Suction IHV-03PC100-A111A8GKJI Integral By Italy ( For Hydraulic Rotation, Hydraulic Winch Double, And Hydraulic Wire line Assy ).
• Hand Control Valve 5Bank ½” DTSC Mono IHV-05-P80-A11111A8GKJI Integral By Italy ( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ).
• Relief Valve : For Adjustment pressure up/down Integral RV2-1/2”F Integral By Italy, – Max Pressure 3000 Psi.
• Regulator Valve : For adjustment flow up/down Integral WFC-800 (1/2”) ,
• Brake Valve : For adjustment brake/ Rem winch /Minute Integral By Italy, CBV2-
  ½” &CBV3- ¾” ,
• Pressure Gauge : By.Skon 0-250 Psi/Bar Umbrella Type

1. Unit Power Device :
2. Rotary Head Motor Jacro 400 (RH 5/8”) 6000 Series 112-1089-006 17T By. ETN USA

• Speed Power : 0-1500 Rpm,
• Power Pressure : 0-5000 Psi, In/Out Put : ½” SAI 0-Ring

1. Up/Down Cylinder Hydraulic Jacro 400 CH Weld Dia Bore ID.85 Rod.50 Stroke 1650mm

• Torsi Capacity : 915Nm (66641 lb/in),
• Speed Power : 1000MM/10 Second,
• In / Out Port : 1/2” SAI O-ring

1. Wire Line Hydraulic Motor Jacro 400 (RH 2/2) 2000 Series 104-1028-006 By. Eaton ETN USA

• Torsi Capacity : 452NM (3961 lb/in),
• Speed Power : 0-250 Rpm,
• In/Out port : ½” SAI O-ring

1. Winch Hydraulic Motor Jacro 400 Double RS80-2 Motor (RH 2/2) 4000 Series 109-1215-006 By. ETN USA

• Torsi Capacity : 915NMC (66641 lb/in).
• Speed Power : 0-700 Second Rpm,
• In/Out port : ½” SAI O-Ring 5. Cylinder Sleding Gearbox Jacro 400 (RH 2/2) Weld Ø Bore ID.40 Rod.25 Stroke 250mm
• Torsi Capacity : 272 NM (2219 lb/in),
• Speed Power : 0-1 Meter/2 Second,
• In/Out port : 3/8” SAI O-ring

1. Hydraulic Clamp Chuck Assy Jacro 400 (RH 2/2) Weld Ø Bore ID.40 Rod.25 Stroke 70mm

• Torsi Capacity : 727 NM (5675 lb/in),
• Speed Power : 0-1 Meter/1.5 Second
• In/Out port : ½” SAI O-ring

1. Hydraulic Cylinder Lift Mash Jacro 400 (RH ½”) Weld Ø Bore ID.63 Rod.40 Stroke 1500mm

• Torsi Capacity : 117 NM ( 6664 lb/in )
• Speed Power : 0–500 Second.
• In / Out Port : 3/8” SAI O-Ring

1. Hydraulic Cylinder Jack Mash Jacro 400 Weld Ø Bore ID.63 Rod.40 Stroke 1500 mm

• Torsi Capacity : 117 NM (6664 lb/in)
• Speed Power : 0-500 Second
• In/Out port : 3/8” SAI O-Ring
• Oil Cooler : 350 Ltr
• Water Injection Pump : FMC Pump
• Drill Pipe : NQ3=400 Mtr, HQ3=300Mtr, & PQ=150 Mtr @ 3 meter
• Drill Bite : Wingbite / PCD
• Water hose : hose polypipe
• Core barel : Assy NQ / HQ

OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
• NQ 400 Meters
• HQ 300 Meters
• PQ 100 Meters