TECHNICAL SPECIFICATIONS:
A. Unit Power Supply :
- Engine Diesel Vertical Kubota 3 Cylinder 1703-E2B-EU-X2 Made in Japan Original .
- Power 32 Hp/ 3000 Rpm
- Hydraulic Power by Gear Pump ALP3AD40+16 Marzocchi (For Rotary, and For up/down ) Max.
- Pressure 3000 Psi/210 bar
- Hydraulic Tank : 80 litre
- Diesel
- Unit Control Device :
- Hand Control Valve 3Bank 3/4” Suction 1DT2SC Branded Integral Italy HDM 20-3D/ d5. ( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ).
- Hand Control Valve 3Bank ½” Mono 1DT2SC Branded Integral Italy HDM 18-50 ½”. ( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ).
- Relief Valve : For Adjustment pressure up/down Integral RV2-1/2” -F
- Max Pressure 3000 Psi.
- Regulator Valve : For adjustment flow up/down Integral FRV2-1/2”
- Max flow 150 liter / minute,
- Brake Valve : For adjustment brake winch and wire line,
- Branded Integral Italy CBV2 ½” 0-3000 Psi,
- Pressure Gauge : By. Skon USA 0-250 Psi
B. Unit Power Device :
- Rotary Head Motor Jacro 200 5(RH ½”) 4000 Series 109-1116 -006 By. Eaton USA
- Speed Power : 0-1200 Rpm,
- Power Pressure : 0-3000 Psi,
- Speed Rotary : 700-1500 Rpm
- Up/Down Cylinder Hydraulic Jacro 200 5CH Dia 63 x 73 x 40 x Stroke 1800mm
- Torsi Capacity : 915MM (66641 lb/in),
- Speed Power : 1000MM/10 Second,
- In / Out Port : 1/2” SAI O-ring
- Wire Line Hydraulic Motor Jacro 200 5(RH 2/2) S Series 103-1032-010 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in),
- Speed Power : 0-250 Rpm,
- In/Out port : ½” SAI O-ring – 4. Winch Hydraulic Motor Jacro 200 5(RH 2/2) 2000 Series 104-1228-006 By. Eaton USA
- Torsi Capacity : 452NMC (3961 lb/in).
- Speed Power : 0-250 Rpm,
- In/Out port : ½” SAI O-ring
- Cylinder Sleding Gearbox Jacro 200 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm
- Torsi Capacity : 542 NMC (5675 lb/in),
- Speed Power : 0-500Meter/ 1.5 Second,
- In/Out port : 5/8” SAI O-ring
- Hydraulic Clamp Chuck Assy Jacro 200 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm
- Torsi Capacity : 300 NMC (5675 lb/in),
- Speed Power : 0-1 Meter/ 1.5 Second,
- In/Out port : ½” SAI O-ring
- Drill Pipe : 50 pipe (seemles) NQ 3” @ 3 meter
- Drill Bite : Wingbite / PCD
- Water hose : hose polypipe
- Core barel : Assy NQ
OPERATIONAL RECOMMENDATIONS
Capacity Drilling Deep Down:
• NQ 200 Meters
• HQ 100 Meters
• PQ 50 Meters